Configuration Data for the Stock Pivot Adapter^TM

Configuration Description:

Left Hand Configuration:  Left Hand Configuration – plug disks in left and center holes, this configuration permits the action to rotate and index all available positions in a Clock-wise direction as the stock is in the vertical position.

Center Configuration:  Center Configuration – plug disks in left and right holes, this configuration permits the action to rotate equally in a Clock-wise and a Counter Clock-wise direction as the stock is in the vertical position to index half of the available positions in each direction.

Right Hand Configuration:  Right Hand Configuration – plug disks in center and right holes, this configuration permits the action to rotate and index all available positions in a Counter Clock-wise direction as the stock is in the vertical position.

Configuration Instructions:

1) Completely read the Installation Instructions and the Configuration Data before beginning installation.

2) Wear eye protection.

3) DO NOT twist or attempt to cycle or operate the SPA until installation of the assembly on the firearm is complete as the 
assembly contains parts in compression that will eject with considerable force and may cause injury or become lost or damaged.

4) Determine the desired configuration from the Configuration Description above. Remove the shipping tie from the SPA. 

5) If redistributing the plug disks is necessary to achieve the desired configuration, grasp the assembly at the top and bottom as 
shown and pull the plate containing the plug disks apart from the two fastened plates, otherwise begin installation.

6) Redistribute the plug disks to achieve the desired configuration, re-assemble the plates together and begin installation.

download the above document in MS Word 2000 format

Rev1